2024 © Copyright Anhui Yangzi Flooring Co., LtdAll rights reserved
Your location:
Length : 1520;1215(mm) Width : 235;195(mm) Thickness : 8;12(mm)
| Laminate Parameters | |
| thickness | 8~11.8mm |
| density | 0.83~0.85g/cm³ |
| wear resistance | AC3/AC4 |
| installation | Click |
| bevel | Painting V-groove |
| finish surface | EIR/Embossed |
| MOQ | 1x20'ft |
| packing data | 8pcs/carton,70carton/pallet,20Pallet/Container |
| Item | Unit | Performance Indicators |
| Density | g/cm³ | ≥0.83 |
| Internal deviation | % | ±3.0 |
| Moisture content | % | 5～7 |
| Water absorption expansion rate | % | X≤12.0 , axX≤14.0 , 2h X≤5 |
| Surface bonding strength | MPa | ≥1.3 |
| Internal bond strength | MPa | ≥1.3 |
| Dimensional stability | mm | ≤0.7 |
| Formaldehyde emission | mg/ 100g | ≤9 |
| Item | Unit | Performance Indicators |
| Density | g/cm³ | ≥0.83 |
| Internal deviation | % | ±3.0 |
| Moisture content | % | 5～8 |
| Water absorption expansion rate | % | X≤8.0 , maxX≤10.0 , 2h X≤3.5 |
| Surface bonding strength | MPa | ≥1.2 |
| Internal bond strength | MPa | ≥1.3 |
| Dimensional stability | mm | ≤0.7 |
| Formaldehyde emission | mg/ 100g | ≤9 |
| Item | Unit | Performance Indicators |
| Density | g/cm³ | ≥0.83 |
| Internal deviation | % | ±3.0 |
| Moisture content | % | 5～8 |
| Water absorption expansion rate | % | X≤8.0 , maxX≤10.0 , 2h X≤3.5 |
| Surface bonding strength | MPa | ≥1.2 |
| Internal bond strength | MPa | ≥1.3 |
| Dimensional stability | mm | ≤0.7 |
| Formaldehyde emission | mg/ 100g | ≤9 |
| Laminate Parameters | |
| thickness | 8~11.8mm |
| density | 0.83~0.85g/cm³ |
| wear resistance | AC3/AC4 |
| installation | Click |
| bevel | Painting V-groove |
| finish surface | EIR/Embossed |
| MOQ | 1x20'ft |
| packing data | 8pcs/carton,70carton/pallet,20Pallet/Container |
| Characteristics | Press Bevel | Painting Bevel |
| Appearance | The bevel and surface are made of the same decor paper,more pleasing appearance. | The color of Bevel painting is similar to the surface color, but cannot achieve good color defferance. |
| Foulling Resistance | The wear layer of bevel surface is the same as flooring surface, it remains shiny and new after years of use. | The Bevel surface is paint,years of use can cause the paint to wear out, and the bevel are prone to dirty,and gradually turn black. |
| Cleaning of Surface | Press Bevel technology, paint free, the finished surface is cleaning. | It is hard to avoid the problem of paint getting on the flooring surface, which will cause trouble for later clean. |
| RECOMMENDED SPECIFICATION | |
| LENGTH * WIDTH | THICKNESS |
| 1215*195MM (4’*7.7”) | 8MM/10MM/12MM |
| 1520*235MM (5’*9.3”) | 8MM/10MM/12MM |
