SPC

Your location:

SPC Flooring
SPC Flooring
SPC Flooring

SPC floors are also divided into the following categories:

A+B COLLECTION

EIR COLLECTION

COMMON COLLECTION

HERRINGBONE COLLECTION

STONE COLLECTION


  • Product Technical Detail
  • Certification and Test report
  • Learn More About SPC Flooring

    SPC is a particularly new product in the flooring industry. It not only gathers most of the current flooring material, but also provides better performance of being water-proof, rigid, dimensionally stable, and relatively environmentally friendly.Thus it can be safely used in areas with sustained exposure to moisture, such as bathroom, laundry room and kitchen. With good rigidity, SPC provides a quieter, warmer vinyl flooring with a cushioned backing attached, thus eliminating the imperfections from the subfloor which is normally transferred through LVT. SPC is available with locking system.



    SPC SIZE RATIO

    • 111.jpg

      SPC-PLANK
    • 112.jpg

      SPC-TILE



    SPC Parameters
    Thickness 3.5mm-8.0mm
    Density 1.9-2.1g/cm³
    Wear resistance 0.3/0.5mm
    Installation Click
    Bevel Painting V-groove
    Finish Surface EIR / Embossed / Deep crystal / Sawmill / Large crystal
    MOQ 1 x 20'ft including 4 colors
    Packing data 10 pcs / bex, 60 bex / drag, 20 paquets / 20' Fcl



    SPC DETECTION PARAMETERS
    Dimensional stability ISO 23999:2008 X Direction: 0.08%
    Y Direction: 0.07%
    Curling ISO 23999:2008 ≤1.0mm
    Residual indentation ISO 24343-1:2007 -0.04mm
    Light stability IS0105-B02:Method 3 ≥6
    Castor chair ISO4918 After 25000 cycles,test specimens no visible damage
    Classification EN ISO 10S82 23,31/33,42
    Reaction to fire EN 13501-1 Bfl-S1
    Slip resistance DIN 51130:2010
    EN 13893
    R10 DS
    Wear resistance EN 660-2 500 grams of pressure
    The amount of wear ≦0.015g
    Thermal resistance EN 12667:2001 0.038m²K/W
    Determination of resistance
    to stains chemical resistance
    ISO26987:2008 Resistant
    Squareness ISO24342:2007
    Deviation range
    X Direction: 0.00mm~+0.05mmY Direction: 0.00mm~+0.05mm
    Straightness ISO24342:2007 Deviation range
    X Direction: 0.00mm~+0.03mm
    Y Direction: 0.00mm~+0.05mm
    Peel resistance ISO 24345:2006 X Direction: 6SN/50mm
    Y Direction: 65N/50mm
    Determination of resistance to
    stubbed and burning cigarettes
    EN1399:1997 Method 8 Rating 3: Moderate change
    of gloss and moderate brown stain
    Utilization Recyclable


    未标题-1.jpg

Inquiry Now
Consulting Products*
Your Name*
Your E-mail*
Your Mobile
Your Message*
Copyright © 2024  All rights reserved.
Anhui Yangzi Flooring Co., Ltd All rights reserved Sitemap  All tags